![]() I know that FireWire is pretty much a dead technology, and since Thunderbolt isn't heavily supported in Windows, it seems USB is really the only viable interface option at this point. So it seems to me that this is all USB related, since that's the primary difference between the two interfaces. I don't lose the connection once SONAR is live), but still goofy. ![]() Doesn't happen often and once it's there, it stays there (i.e. The Scarlett will sometimes not be recognized right away when I launch SONAR and will require either (a) closing SONAR, firing up Mix Control, make sure settings are correct, then re-launching SONAR, or (b) powering off/on the interface to get everything reset. Not a big deal of course because who cares, but still odd. I used to hear the "welcome" jingle when starting Windows, now I just hear a couple static pops, as if the Scarlett is fully fired up and ready by the time Windows startup plays the audio file. 4) For whatever reason, it seems to take the USB connection a while longer to fire up when starting Windows. But if I run into sync settings again, not sure what my options are, aside from getting rid of the SPDIF connection and running analog outs from the 11R into line inputs on the Scarlett. Hopefully I don't notice any clicks/pops this time around - and that would inevitably be better anyway since I'd no longer have to change clock settings and could just keep the Scarlett set at Internal. SONAR then recognizes the Eleven Rack as my ASIO device and I'm not able to select the Scarlett. While I haven't noticed the clicks/pops thus far with the Scarlett, I have noticed that I cannot set the Scarlett to SPIDF and still use it within SONAR. With the Saffire, I noticed some clicking/popping when tracking with the Eleven Rack, so I ended up changing the clock settings on the Saffire from Internal to SPDIF, and that did the trick. without having to use the hardware's knobs/buttons). I also have the Eleven Rack connected to the PC (USB connection) so I can run the Eleven Rack Editor (change amp models etc. 3) I have an Eleven Rack connected to the Scarlett via SPDIF. If SONAR is open, everything else is locked out. Likewise, I could have a browser open and jump back and forth between YouTube and SONAR without a hitch. (I'd select the "share drivers" settings within SONAR first, of course.) I could have an open session in SONAR, export audio, then play it back in Windows Media Player without having to close out SONAR. 2) While it's often been said that Windows doesn't allow applications to share ASIO drivers simultaneously, I was always able to do this with the Saffire. ![]() It seems the only way to do this with the Scarlett is to manually set up a cable patch from physical outputs/inputs on the interface. While I didn't use the feature very often, it was nice to be able to record what my PC was "hearing", as in, set up loopback, arm/record a track, then play something on YouTube, thereby capturing the audio. However, there are some drawbacks: 1) The Scarlett does not have a loopback function in Mix Control, whereas the Saffire did. The Scarlett's settings are in milliseconds as opposed to samples so that took a little getting used to, but I'm still able to track at 2ms without any clicks/pops/dropouts, which is on par with the Saffire. I'd always set the Saffire at 64 samples when tracking, then bumped up to 512 or 1024 when mixing. (Yes, there's ALWAYS latency, but both buggers are fast and latency during tracking isn't noticeable). The Pros: just like the Saffire, the Scarlett's latency is little-no-none. While overall the performance is exactly as expected and a very clean transition to the Scarlett, I have noticed some differences and my guess is that it has more to do with the connection type (USB vs FireWire). Due to several hardware/OS-related reasons, I found it necessary to switch from my longstanding Saffire Pro 40 (FireWire) interface to its USB counterpart, the Scarlett 18i20. Thoughts on Focusrite Scarlett 18i20 vs Saffire Pro 40 ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |